tai-saw technology co., ltd. fr-71s03-01 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com approval sheet for product specification issued date: nov, 28, 2006 product name: saw filter 400 mhz smd 3.8x3.8 mm tst parts no.: TB0464A customer parts no.: company: division: approved by : date: checked by: bob chau approval by: francis chen date: 11, 28, 2006
tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com saw filter 400mhz model no.:TB0464A rev. no.:1 a. maximum rating: 1. input power level: 10 dbm 2. dc voltage : 3v 3. operating temperatur e: -20c to +75c 4. storage temperatur e: -40c to +85c b. electrical characteristics : item unit min. type. max. note center frequency, fc mhz - 400 - - max. insertion loss ( fc 75 khz) il (excluding loss in matching elements) db - 4 6.0 - max. insertion loss ( fc 75 khz) il (including loss in matching elements) db - 5 7.5 - passband ripple ( fc 75 khz) db - 0.4 2 - group delay ripple ( fc 75 khz) sec - 0.6 2 - relative attenuation (relative to il ) fc - 100 to fc - 1.5 mhz db 35 63 - - fc - 1.5 to fc - 0.8 mhz db 20 63 - - fc - 0.8 to fc - 0.6 mhz db 10 65 - - fc - 0.6 to fc - 0.4 mhz db 7 32 - - fc + 0.4 to fc + 0.6 mhz db 7 32 - - fc + 0.6 to fc + 0.8 mhz db 10 58 - - fc + 0.8 to fc + 1.5 mhz db 20 58 - - fc + 1.5 to fc + 100 mhz db 35 55 - - temperature coefficient of frequency tc f -0.036 ppm/k^2 rohs compliant lead free lead-free soldering
tai-saw technology co., ltd. 3 tst dcc release document c.outline drawing: product year code year 2001 2005 2002 2006 2003 2007 2004 2008 product code b b b b d. pcb footprint: pin configuration #a input #b input ground or balanced input #e output #f output ground or balanced output #c,d,g,h to be grounded year code date code unit mm 4 6 4 t
tai-saw technology co., ltd. 4 tst dcc release document e. measurement circuit: 50 ohm test circuit ( singl e-ended / single-ended ) 50 ohm test circuit ( balanced-ended / balanced-ended ) 50? hp network analyzer 50? saw filter l1=68nh in out l1=68nh a e f c,d,g,h b 50? hp network analyzer 50? saw filter 39nh in out 39nh 39nh 39nh a e f c,d,g,h b 1:1 1:1
tai-saw technology co., ltd. 5 tst dcc release document f. frequency characteristics :
tai-saw technology co., ltd. 6 tst dcc release document g. packing : 1. reel dimension 2.tape dimension 464 tb direction of feed
tai-saw technology co., ltd. 7 tst dcc release document 20 40 60 80 100 120 140 160 180 200 220 240 260 280 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 time (sec) temp ( deg c) h. recommended reflow profile :
|
